How To Install Type R Spoiler

How to Install a Type R Spoiler: A Step-by-Step Guide

Want to give your car that aggressive, sporty look? Installing a Type R spoiler is a great way to achieve that. While it might seem daunting, with the right tools and instructions, it's a manageable DIY project. This guide will walk you through the process step-by-step, ensuring a clean and secure installation.

Before You Begin: Preparation is Key

Before you even touch your car, make sure you're properly prepared. This will save you time, frustration, and potential damage.

Gather Your Tools and Materials:

• Your Type R Spoiler: Make sure it's the correct one for your car model and year.
• Measuring Tape: For precise placement.
• Masking Tape: To mark the spoiler's position.
• Drill (with appropriate drill bits): If your spoiler requires drilling. Check your spoiler's instructions – some use pre-existing holes.
• Screwdriver (Phillips or flathead, depending on your spoiler): For securing the spoiler.
• Bolts, Nuts, and Washers (if needed): Again, check the included hardware with your spoiler.
• Silicone Sealant or Adhesive: For added security and water resistance (check the spoiler instructions for compatibility).
• Clean Rags: To wipe away any dirt or debris.
• Safety Glasses: Protect your eyes from flying debris.
• Gloves: Protect your hands.
• Car Wash and Drying Towels: To clean your car before installation.

Preparing Your Car:

1. Thoroughly Clean the Trunk Lid: Remove any dirt, debris, or wax from the area where the spoiler will be mounted. A clean surface ensures proper adhesion.
2. Locate the Mounting Points: Carefully examine your spoiler and your car's trunk lid to identify the mounting points. Your spoiler will likely come with instructions showing these locations.

Installation Process: Step-by-Step

Now that you're prepped, let's get to the installation. Remember, patience is key.

1. Dry Fit the Spoiler: Carefully place the spoiler on the trunk lid to check the fit and alignment. Use masking tape to mark its position. This is crucial for accurate placement. Take your time here!
2. Drill Pilot Holes (if necessary): If your spoiler requires drilling, use a small drill bit to create pilot holes. This prevents the larger screws from cracking the paint or the trunk lid. Only drill if your spoiler's instructions explicitly state this is necessary.
3. Apply Adhesive or Sealant (if needed): If your spoiler uses adhesive, apply a thin, even bead along the mounting surface. Follow the adhesive manufacturer's instructions.
4. Secure the Spoiler: Carefully align the spoiler with the marked position and firmly attach it using the provided screws, bolts, or adhesive.
5. Check for Alignment: Once the spoiler is secured, step back and visually inspect its alignment. Make adjustments if necessary.
6. Allow Adhesive to Cure: If you used an adhesive, allow it to cure completely before driving. Check the adhesive’s instructions for cure time.

Post-Installation Tips:

• Inspect Regularly: Check the spoiler's mounting periodically to ensure it remains securely attached.
• Avoid Harsh Chemicals: Use gentle car wash products to clean around the spoiler, avoiding harsh chemicals that could damage the paint or adhesive.
• Enjoy Your New Look: Congratulations! Your car now sports a sleek Type R spoiler.

Disclaimer: This guide provides general instructions. Always refer to the specific instructions provided with your Type R spoiler for detailed information and safety precautions. If you are uncomfortable performing this installation yourself, consider seeking professional assistance from a qualified auto body shop. Improper installation could damage your vehicle.